expertise in action

High Pressure Piping Inspection and Integrity Management

High Pressure Piping Inspection and Integrity Management

As an Asset Manager or Boiler Engineer in a plant with high pressure piping, you know there's a lot at stake.

Major failures in high pressure piping systems can result in personnel injuries and fatalities, damaged equipment, costly loss of production, and massive liability fines.

With high pressure piping in many major plants approaching end of life, you may be experiencing problems like:

  • High temperature creep;
  • Fatigue;
  • Thermal shock;
  • Corrosion;
  • Cracking; or
  • Dysfunctional hangers.

Prevention is always better (and cheaper) than cure, so don't ignore your high pressure piping system until it's too late. At HRL, we provide a comprehensive high pressure piping inspection and maintenance program, ensuring the integrity of your piping system to prevent future failures and protect your plant.

With a proven track record serving businesses like Synergy, AGL, and NRG, we deliver unmatched high pressure piping expertise, cutting-edge modelling software, and high-level analysis and reporting.

Our comprehensive program

Leveraging our vast technical expertise and experience in Australia and internationally, we've developed a comprehensive asset integrity management program for high pressure piping systems. Our process encompasses the following stages:

1. Initial Inspection: Our experienced team of engineers and metallurgists inspect your piping system, either during both a planned outage (cold survey) and during operation (hot survey)

2. Initial Analysis: Using the data gathered, we conduct in-depth analysis to calculate the condition of your piping focusing on problem areas due to thermal expansion and temperature creep

3. Flexibility Analysis: If necessary, we then perform flexibility analyses using a computer program to simulate our findings and identify the stressors that are causing issues

4. Repair or Replacement: With the stressors clearly identified, we then calculate how long the piping can survive in its current state. Depending on the findings, we may then implement:

  • a. Refloating: repositioning of the hangers and refloating the pipe back to its original configuration (plus strain gauging, if required); or
  • b. Risk-Based Inspection: using the results from the initial inspection and simulation to highlight the highest risk welds or points in the piping, and then recommending repair or replacement as required

5. Ongoing Risk-Based Maintenance Program: With the work above completed and your high pressure piping system fit for use for the next four years, we then put in place an ongoing inspection program to maintain its integrity

6. Overall Program Report: All work completed is documented in a thorough technical report detailing the work undertaken and the maintenance program moving forward.

After every stage, we deliver a comprehensive technical report detailing the work done, the findings gathered, and our recommendations regarding next steps. You can engage us to implement the entire program end to end, or certain stages as required.

For more information on our high pressure piping inspection program see the below links:

Benefits

With HRL's high pressure piping inspection and integrity management program, you'll ensure:

  • The safety of your personnel, avoiding potential injuries, fatalities, and liability costs
  • The reliability of your statutory equipment, avoiding unexpected outages, urgent repairs, and months of lost operation. In fact, the cost of this work is usually less than half a day's lost operation!
  • Compliance with the statutory requirements for peace of mind
  • An extended life expectancy for your plant
  • Invest in maintenance now to save money moving forward

Why choose HRL?

  • Unmatched high pressure piping expertise
  • The latest, cutting-edge modelling software
  • A collaborative, customised approach with a focus on your specific objectives
  • High-level reporting with more detail, frequency, and analysis than you'll find elsewhere
  • A proven track record with organisations including Synergy, AGL, NRG, Stanwell, Nestle, Santos, and Paiton 

Meet the expert

JAMES TAYLOR

Thirty years' experience in engineering consultancy of mining plant, rail track, rail passenger vehicles and rolling stock, transport vehicles, petrochemical and power plant. Specialising in pressure equipment (vessels and piping).  Company signatory for pressure vessel design verification. Fitness for purpose analysis including product integrity assessments. Australian Standards compliance testing.

Read More

What Our Clients Say

Technically capable / competent in a number of areas, successfully used on a number of projects.  Technical consulting.", 

David Webster
Read All

See expertise in action:

Ready to transform your business performance?

Contact our technical consultants on -
+61 3 9565 9888
or
info@hrl.com.au to get started today.

Our Certifications

NATA

NATA accredited AtS/NZS ISO 17025, AS/NZS ISO 17020NATA Accredited Laboratories number 561

ISO 9001 Quality Management

ISO 9001 Quality Management certified by BSI under certificate number FS605116.